Presto Geosystems offers its free GEOWEB® MSE design software for gravity and reinforced wall applications. Create vegetated and non-vegetated MSE structures based on the GEOWEB® system inputs for reinforced slopes, gravity walls, and geogrid-reinforced walls. The software is based on industry-standard design methods and contains specific algorithms that capture the unique interaction between the GEOWEB® system, retained, foundation, and reinforced soil; specific factors of safety; and geogrid reinforcement, if applicable. This webinar will provide an in-depth tour of the MSE wall design software. You will learn how to navigate the software and input simple data to create a full-graphic design analysis and cross-sectional drawing. In this webinar, you will learn: About the different types of retaining wall systems possible with the GEOWEB system. How the MSE Wall Design Software functions and the supporting design theory. How the software performs an analysis with simple data input screens for both gravity and reinforced systems. About real-world applications through an overview of case studies.
Retaining wall systems are used to hold back earth and achieve grade separation between two adjacent points at different elevations. There are many types of retaining wall systems, including concrete, steel, gabions, sheet piling, and reinforced soil. The GEOWEB® Retaining Wall System, in general, belongs to the reinforced soil category. Depending on the slope angle and site conditions, retaining walls are commonly referred to as gravity walls, reinforced walls, or reinforced soil slopes. The GEOWEB Retaining Walls make it possible to stabilize soil at the face of the wall or slope with a naturally vegetated fascia. The GEOWEB system’s open-celled terraces create a natural environment for sustainable vegetation and allow stormwater infiltration. The GEOWEB walls conform well to landscape contours, are resistant to environmental degradation, and install 25-30% faster than MSE block walls. Learning Objectives: Learn about the different types of retaining wall systems that can be built with the GEOWEB system. Understand the design of the GEOWEB System for various wall and reinforcement types, applications, and site conditions. Learn about unique system features and what sets GEOWEB Retaining Walls apart from other types of walls. Learn about the free design tools and software offered by Presto Geosystems for retaining… Read more »
When unpaved roads, drill pads, and work platforms are constructed over weak subgrades, base deterioration can lead to degradation. This degradation leads to unwanted deflections, rutting, and ultimately failure of the surface layer. The GEOWEB® Soil Stabilization System significantly reduces the vertical pressure reaching the subgrade, provides a high-stiffness foundation and reduces cross-section thickness up to 50% or more. Increasing the load capacity of the subgrade allows it to effectively handle heavy vehicle and drill rig loads while reducing maintenance cost. Learning Objectives: Understand the benefits of using the GEOWEB Soil Stabilization System to stabilize surfaces for unpaved roads, drill pads, and work platforms using low-quality fill or sand. Discover how 3D-confined base material reduces cross-section depth and provides a more stable base, especially over soft subgrade soils. Learn how the GEOWEB system reduces vertical pressure and subbase movement. Learn how the GEOWEB system performs effectively when subject to heavy vehicle and drill rig loadings.
Channels subjected to high flows and associated shear stresses are susceptible to washout of natural soils and rock, which leads to uncontrolled water movement and further degradation. Typical riprap and concrete protection can be expensive and difficult to install. The GEOWEB® channels may be designed with a variety of infill materials to meet aesthetic requirements and resist anticipated hydraulic flows and associated stresses. The GEOWEB® Channel Protection System provides a variety of economical and flexible protection treatments for open channels and hydraulic structures. The system delivers stability and protection for channels exposed to erosive conditions ranging from low-to-high flows—either intermittent or continuous. The GEOWEB system, which can be filled with topsoil, aggregate, or concrete, lowers costs for stormwater control by utilizing on-site materials and eliminating the need for internal reinforcement. GEOWEB channels can withstand high-velocity flow over long channels, and the ability to incorporate energy dissipation allows the GEOWEB system to successfully perform when applied along steep slopes. Learning Objectives: Understand the benefits of GEOWEB channel protection from accredited research and testing. Learn how the GEOWEB confinement system can accommodate typical construction issues and design problems. Understand the typical applications for GEOWEB channel protection and how to utilize on-site materials…. Read more »
The energy sector is faced with many challenges when it comes to project design and construction. Many times access/construction roads need to be built over soft, wet soils and must be able to support very heavy loads. Touch and step hazards abound at electrical substations. Pipelines can traverse over hilly/mountainous areas where slopes need to be stabilized after construction is complete. As in all construction projects, stormwater needs to be managed. Presto Geosystems can provide cost-effective, low-maintenance, quality solutions for all of these potential issues using our GEOWEB® 3D Soil Stabilization System (Geocells) and GEOTERRA® Construction Mats. This webinar will explore the solutions and services that are available through Presto. Learning Objectives: Learn about the development of geocell technology, the general applications where it can be used, and the different installation accessories available. Understand how geocells can be useful in energy sector applications, specifically in load support, channel protection, and slope protection. Learn how geocells can eliminate touch and step hazards while still providing stable work surfaces. Gain an understanding of the variety of applications GEOTERRA mats can be used for on construction sites–temporary and permanent use. Learn about successful energy projects using the GEOWEB geocells and GEOTERRA Construction Mats.
Infrastructure development for highways and road corridors faces many challenges when it comes to project design and construction. Building asphalt or concrete roadways over soft soils requires thick base layers of expensive stone, and pavement surfaces often fail just a few years after installation. Expanding road width requires steepening corridor embankments, leading to potential slope failure that can cause road closures and damage. Stormwater management alongside roads is an increasingly common concern due to limited construction space and larger storm events. Presto Geosystems provides cost-effective, low-maintenance, quality solutions for all of these potential issues using our GEOWEB® 3D Soil Stabilization System. In this webinar, we will discuss how to utilize these solutions to address the challenges of aging infrastructure. Learning Objectives: • Gain an understanding of the innovative ways Presto Geosystems’ products can provide permanent stability solutions along roadways and surrounding areas. • Understand how geocells perform in the most challenging soil conditions. • Learn about different geocell applications and where they can be used in roadway corridors. • Learn how to use geocells to help manage stormwater runoff alongside roads and prolong pavement life.
Today’s increasingly stringent environmental regulations continue to create the need for Low Impact Development (LID) and Green Infrastructure (GI) management on project sites. New and innovative methods must be used to limit hard surfaces such as parking lots, walkways, and emergency access lanes. Land access is at a premium, and areas of environmental protection are increasing, requiring builders and engineers to work with regulators to utilize both LID and GI practices. Porous pavements are an easy and economical way to reduce the impervious surfaces on-site and restore the natural water cycle close to its source. Porous pavements have the added benefit of reducing the size of above-ground detention ponds and minimizing conveyance and treatment infrastructure. Stormwater diversion channels, roadside swales, and drainage ditches can be constructed with low-maintenance solutions, protecting against erosion and overflow concerns. Living green walls increase the amount of vegetation on-site, help promote water filtration from higher elevations, and allow access to more valuable land. Learning Objectives: Learn what Low Impact Development and Green Infrastructure mean for residential and commercial project sites. Gain an understanding of the regulations governing these practices and how they have been met with traditional construction methods. Learn about porous pavement options and… Read more »
Today’s increasingly stringent stormwater regulations continue to create the need for stormwater management. The preferred method is to retain the stormwater on-site rather than having it move off-site through overland flow or into storm sewers. Typical solutions—retention or detention ponds—are expensive to construct, occupy valuable land, require significant maintenance, can be safety hazards, and are unattractive nuisances. An alternative solution is to reduce the amount of impermeable surface on the site. Hard-surface (asphalt and concrete) porous pavements are expensive and can be very difficult and time-consuming to install. Rigid and flexible plastic porous pavement systems provide a low-cost, easy-to-install surface designed to handle the most demanding load requirements. The porous pavers from Presto Geosystems can have a vegetated or aggregate infill. Learning Objectives: Understand the benefits of porous pavements. Learn how the rigid and flexible porous pavements perform under varying infill materials and traffic-loading conditions. Learn how to apply vegetated and aggregate porous pavements for a variety of project conditions. Understand how porous pavements are capable of detaining stormwater runoff.
The energy sector is faced with many challenges when it comes to project design and construction. Many times access/construction roads need to be built over soft, wet soils and must be able to support very heavy loads. Touch and step hazards abound at electrical substations. Pipelines can traverse over hilly/mountainous areas where slopes need to be stabilized after construction is complete. As in all construction projects, stormwater needs to be managed. Presto Geosystems can provide cost-effective, low-maintenance, quality solutions for all of these potential issues using our GEOWEB® 3D Soil Stabilization System (Geocells) and GEOTERRA® Construction Mats. This webinar will explore the solutions and services that are available through Presto. Learning Objectives: Learn about the development of geocell technology, the general applications where it can be used, and the different installation accessories available. Understand how geocells can be useful in energy sector applications, specifically in load support, channel protection, and slope protection. Learn how geocells can eliminate touch and step hazards while still providing stable work surfaces. Gain an understanding of the variety of applications GEOTERRA mats can be used for on construction sites–temporary and permanent use. Learn about successful energy projects using the GEOWEB geocells and GEOTERRA Construction Mats.
Ballast degradation can rapidly occur under heavy axle loadings over soft subgrade soils. Ballast failure can lead to speed reductions, track downtime, and costly maintenance and repairs. Using the GEOWEB® Ballast Stabilization System reduces the vertical pressure reaching the subgrade and provides a high-stiffness foundation. GEOWEB stabilized ballast significantly reduces ballast movement, aggregate rotation, and rail settlement—resulting in increased ballast life and long-term performance. Learning Objectives: Understand the benefits of GEOWEB-stabilized ballast from accredited research and testing. Learn how the GEOWEB stabilization system can reduce vertical ballast pressure and ballast movement. Understand the typical applications for GEOWEB ballast stabilization. Learn how to apply GEOWEB stabilization to extend rail life and reduce maintenance.
800.548.3424
